<tr id="fumjy"><input id="fumjy"><small id="fumjy"></small></input></tr>

  • <tr id="fumjy"></tr>
    <ol id="fumjy"></ol>

    <big id="fumjy"></big>

    <big id="fumjy"></big>
  • <legend id="fumjy"></legend>
    1. <legend id="fumjy"><sup id="fumjy"></sup></legend>
      中文
      + 更多 聯系我們
      聯系我們

      蘇州威旻達機械設備有限公司

      聯系人:王經理

      手機:15906136866

      電話:0512-68136800

      傳真:0512-68136800

      地址:蘇州市吳中區吳中大道5399號 

      行業資訊

      斷橋鋁門窗設備原材料使用規范標準

      2018-03-12 點擊數:943
      在斷橋鋁門窗安裝登門窗發泡劑動工后,要趁早將門窗的鐵腳施行掩埋。用砼或沙漿封錨腳,干固后,抽去斜木,那里面窗沿要用C20細砼澆搗,而后行粉刷。動工時要保證洞口周邊的粉刷品質。
      In the aluminum doors and windows installed on doors and windows of foaming agent after the start, as early as possible the doors and windows of the iron feet as buried. With concrete or mortar anchor seal foot, dried, smoked deramping wood, the window with C20 fine concrete pouring, and then paint. Work to ensure the quality of the whitewash around the hole.
      洞口過梁水準度扼制在1.5‰,全長不超過3mm,洞口鉛直度扼制在1.5‰。粉刷后注意增強養護,避免粉刷層裂隙而滲水。斷橋鋁門窗設備廠的技術覺的,門窗是一棟房子的窗口,是很重要的一部分,如果安裝不好呢會影響保溫的效果,還會漏水,會造成很嚴重的效果,斷橋鋁門窗設備原材料使用標準規范:
      The level of control in the lintel 1.5 per thousand, total length of not more than 3mm, the vertical degree of control in 1.5 per thousand. After the painting, pay attention to strengthen the maintenance, to avoid the crevice of the brush layer and water seepage. The technology and windows of a broken bridge aluminum door and window equipment factory is a window of a house. It is a very important part. If the installation is not good, it will affect the effect of heat preservation, and it will also leak. It will cause serious effect.
      1、框材總的要求應該是強度好,隔熱性能好,易制做成各種造形,又要易于回收和有利于環境保護。
      1, the general requirements of the frame material should be good strength, good heat insulation, easy to make all kinds of shape, and easy to recover and be conducive to environmental protection.
      2、玻璃應該推廣使用中空玻璃,而且在北方應推廣使用Low-E型(低輻射)中空玻璃。

      2, glass should be extended to use hollow glass, and the Low-E (low radiation) hollow glass should be popularized in the north.

      鋁切割設備

      3、推廣使用雙道密封和用聚硫中空玻璃膠制做的中空玻璃,中空玻璃間隔條應采用連續彎角式結構,如果用四角插接式的,在接頭處必須用丁基膠作密封處理。
      3, we should extend the use of double channel seal and hollow glass made from polysulfide hollow glass glue. The spacer bar should be constructed with continuous bending angle structure. If we use four angle socket type, we must use butyl rubber as sealing treatment at the joint.
      4、斷橋鋁合金門窗加工必須實現精品化;因為只有這樣,才能使其具有良好的使用性能和較好的環境美化作用。
      4. The processing of aluminum alloy doors and windows of the broken bridge must be refined, because only in this way can it have good use performance and better environmental beautification.
      據斷橋鋁門窗設備廠家介紹,隔熱斷橋鋁門窗設備的熱傳導系數K值為3W/m2.K以下,熱傳導性比非隔熱鋁合金型材門窗降低40%~70%,降低取暖費用30%左右,隔聲量達35分貝以上,水密性、氣密性良好,均達國家A1類窗標準。
      According to the introduction of the aluminum doors and windows equipment manufacturers, the heat conduction coefficient of K insulation aluminum doors and windows equipment value is below 3W/m2.K, the thermal conductivity of insulation than Aluminum Alloy PVC and reduce 40%~70%, reduce heating costs about 30%, amounted to more than 35 decibels of sound insulation, water tightness, good air tightness, reached the national standard A1 window class.
      以上的知識由鋁切割設備 http://www.enfuns.com 提供,我們公司將秉承誠信合作,共贏發展的方針,面向社會提供服務,感謝您的光臨!
      The above knowledge provided by aluminum cutting machine http://www.enfuns.com, our company will uphold the integrity and win-win cooperation and development policy, to provide services for the community, thank you for your visit!