<tr id="fumjy"><input id="fumjy"><small id="fumjy"></small></input></tr>

  • <tr id="fumjy"></tr>
    <ol id="fumjy"></ol>

    <big id="fumjy"></big>

    <big id="fumjy"></big>
  • <legend id="fumjy"></legend>
    1. <legend id="fumjy"><sup id="fumjy"></sup></legend>
      中文
      + 更多 聯系我們
      聯系我們

      蘇州威旻達機械設備有限公司

      聯系人:王經理

      手機:15906136866

      電話:0512-68136800

      傳真:0512-68136800

      地址:蘇州市吳中區吳中大道5399號 

      行業資訊

      門窗設備調試應該從哪些方面入手?

      2018-05-11 點擊數:1489
      ,電力方面。電壓380V是一般的門窗機械設備的正常的電壓,電壓一定要穩定,線路盡量不會影響設備使用和人員操作,地面線路要用護罩保護。
      First, electric power. The voltage 380V is the normal voltage of the general door and window machinery, the voltage must be stable, the line will not affect the use of equipment and personnel operation as far as possible. The ground line should be protected by the shield.
      第二,供氣方面。由于門窗設備的壓料要保證充足的供氣量,這樣就能更好的使用了,這是基礎,來實現氣缸壓緊。正常情況下,門窗設備的供氣量和氣壓都是有固定的參數要求的,即供氣流量要達到0.3,氣壓也要能夠達到8個壓。在有多個門窗設備的情況下,這就需要多準備一些儲氣罐,這個根據現實情況而定。如果氣壓達不到,門窗加工設備的精確度就會進出產生相應的一些影響,相應地加工效果也會發生一些偏離預想的現象。
      Second, gas supply. Because the pressure material of door and window equipment should ensure sufficient gas supply, it can be better used. This is the foundation to achieve cylinder compaction. Under normal conditions, the gas supply and air pressure of the door and window equipment are required by fixed parameters, that is, the gas supply flow is up to 0.3, and the air pressure will be able to reach 8 pressure. When there are multiple doors and windows, this requires more gas storage tanks, depending on the actual situation. If the air pressure is not reached, the accuracy of the processing equipment of the door and window will have some influence, and some deviations will occur in the corresponding processing effect.

      第三,設備方面。斷橋鋁門窗設備種類很多,每一種設備又會有多種型號,或者多種設備部位不同等等。所以在門窗設備的安裝調試方面,需要協調好各個區域的工作,把握好每一個細節。

      鋁切割設備

      Third, equipment. There are many kinds of equipment for broken aluminum doors and windows, and each type of equipment will have a variety of models, or different parts of equipment. Therefore, in the installation and commissioning of doors and windows equipment, we need to coordinate the work of various regions and grasp every detail.
      第四,空間方面,在設備使用場地,要合理安排設備擺放位置,做到從原材料的存放和鋸切加工到成品門窗出廠一條龍,不要出現東邊下料還需要去西邊搬運材料的問題。
      Fourth, in space, in the use of equipment, the equipment should be arranged properly, from the storage and sawing of the raw materials to the finished product of the finished door and window.
      第五,安全方面。要做到設備專人專用,并張貼設備的安全使用規范和出現安全事故的處理方法。
      Fifth, safety. It is necessary to make special use of equipment, and to put in place safe use specifications for equipment and to deal with safety accidents.
      第六,設備維護。設備的維護要專人進行,維護前一訂要停電停氣。每天使用完畢,清理設備和碎料,并檢查設備有無異常。
      Sixth, equipment maintenance. The maintenance of equipment should be carried out by dedicated personnel. Daily use, clear equipment and debris, and check whether the equipment is abnormal.